MÃ HÀNG VAN KÍCH HOẠT ĐẦU BÌNH

• MNC-06 Van kích hoạt đầu bình

MÔ TẢ

• Thiết bị điều khiển van đầu bình được sử dụng kích hoạt hệ thống bình khí. Nó có 2 cơ chế hoạt động là kích hoạt dựa trên áp lực khí từ bộ bình kích và kích hoạt dựa trên cơ chế bằng tay.
• Chất liệu: C3771, C3604 (KS D 5101)
• Kết nối ống đồng: 6.3Ø
  
• Áp lực làm việc: 0.5Mpa
• Ren kết nối: M38 x P1.5
  
• Áp lực kiểm tra: 24.5Mpa

Eng:

DESCRIPTION
The agent needle cylinder is used for the pneumatic operation of the agent cylinder assembly during system discharge. It is installed on the actuation port at the top of the discharge valve of EFS or PFS. The agent needle cylinder is fitted with a steel needle attached to a needle head that acts as a piston. Pressure from the actuating fluid in the master or pilot cylinder entering the needle cylinder through the copper tubing connected to one of the two copper tube ports is used to actuate the needle head. The other copper tube ports can be plugged or used as an interconnection port for the pneumatic actuation line when two or more agent cylinders are installed protecting the same hazard area. Once operated, the needle cylinder automatically resets when the actuation pressure in the pneumatic actuation line is relieved to below 6 bar (87 psi). The agent needle cylinder is equipped with a push button that can be used for manual operation. The push button is properly secured by a safety clip.

Approvals for use with EFS/PFS……………………………………………. UL, FM
Minimum actuation pressure ………………………………………….6 bar (87 psi)
Hydrostatically tested at ………………………………………344.7 bar (5000 psi)
Material
Body………………………………………………………………………………….Brass
Needle………………………………………………………………….Stainless Steel
Push button………………………………………………………………………..Brass
Safety clip …………………………………………………………….Stainless Steel
Reset spring………………………………………………………….Stainless Steel
Copper tubing nominal size……………………………………………6 mm (1/4 in)
Copper tubing connection ……………………………………… Compression joint
Weight ……………………………………………………………………….0.5 kg (1.1 lb)